0 SK-5165 Arnott New Rear Shock Land Rover Discovery (L462 Chassis, w/o VDS) 150

REAR SHOCK REMOVAL

1 Raise vehicle.

2 Remove applicable rear wheel.

3 Deflate air spring on applicable side per manufacturer’s specifications.

4 Remove the interior trim in front of the third-row seat on the applicable side to gain access to the shock top mount nuts. (Figure 1)

5 Remove the three (3) top nuts from upper shock mount. (Figure 2)

6 Remove the lower shock mount bolt. (Figure 3)

7 Remove the shock from vehicle. (Figure 4)

8 Removal complete.

REAR SHOCK INSTALLATION

Tighten all nuts and bolts to manufacturer’s specifications during the installation process.

1 Install the shock and lower shock bottom nut and bolt and tighten to manufacturer’s specifications. (Figures 5, 6)

2 Install the three (3) top mount nuts and tighten to manufacturer’s specifications. (Figure 7)

3 Reassemble the interior trim.

4 Inflate applicable air spring(s) per manufacturer’s specifications.

5 Reinstall applicable rear wheel.

6 Lower vehicle.

7 Installation complete.