0K-4078Nitrogen Suspension Refill ToolPorsche150Installation
1
Raise the vehicle.
2
Bleed the air suspension reservoir per manufacturer’s specifications.
3
Remove necessary trim to gain access to the air suspension reservoir. (Figures 1, 2)
4
Locate the reservoir air line. Remove a section of the line no more than 5mm (0.2”) in length. (Figure 3)
5
Remove the shipping pins from the VOSS fittings in the Refill Tool. (Figure 4)
6
Insert the air line into each end of the Refill Tool. Ensure the lines are firmly seated in the fittings. (Figure 5)
7
Secure the Refill Tool by appropriate means. (Figure 6)
8
Fill the air suspension system per manufacturer’s specifications.