1 K-3260, K-3261 ULTIMATE RIDE/SMOOTH RIDE SHOCK CAN KIT

TruAIR

GENERAL INFORMATION:

Reading this manual signifies your agreement to the terms of the general release, waiver of liability, and hold harmless agreement, the full text of which is available at

SHOCK CAN INSTALLATION

1. Remove the shocks from motorcycle. The air spring must be completely deflated and the shock must also be fully extended.

2. Grasp the top of the shock and unscrew the can in a counter clockwise direction from the shock top. (FIGURES 1, 2)

3. Screw the new can onto the shock until hand tight. (FIGURES 3, 4)

4. Installation complete.