0 AS-5705 Arnott New Rear Air Shock Various GM SUVs (K2, w/Z85 Package, SWB & LWB) 150

AIR SHOCK REMOVAL

1 Set steering to straight ahead.

2 Lift vehicle and remove rear wheel. (Figure 1)

3 Locate and remove the air line to deflate the air shock. Turn the metal clip approx. 90° To remove the air line fitting from the air shock. (Figure 2)

4 Loosen and remove the upper and lower shock mounting nuts. (Figure 3)

5 Support the axle to relieve pressure from the air shock’s mounting points. Remove the upper and lower air shock mounting bolts. (Figure 4)

6 Remove the air shock from the vehicle. (Figure 5)

7 Removal complete.

AIR SHOCK INSTALLATION

Tighten all nuts and bolts to manufacturer’s specifications during the installation process.

1 Install the air shock into the vehicle. The air line fitting should be facing the rear of the vehicle. (Figure 6)

2 Install upper and lower air shock bolts/nuts and tighten to manufacturer’s specifications. (Figures 7, 8)

3 Reattach air line, ensuring retention clip is properly oriented in the grooves. (Figure 9)

4 Replace rear wheel.

5 Lower vehicle.

6 Installation complete.