0 A-5654 Arnott New Rear Air Spring Land Rover Defender 90 & 110 (L663 Chassis, Excl. OCTA) 150

AIR SPRING REMOVAL

1 Raise the vehicle.

2 Remove the applicable rear wheel. (Figure 1)

3 Loosen and remove the air line. (Figures 2, 3)

4 Remove the collet and VOSS fitting from the air line. (Figures 4, 5)

5 Using a pry hook, remove the top clip. (Figures 6, 7)

6 Remove the lower mount from the lower control arm. Pinch the mount to ease the removal. (Figures 8, 9)

7 Remove the air spring from the vehicle. (Figure 10)

8 Removal complete.

AIR SPRING INSTALLATION

Tighten all nuts and bolts to manufacturer’s specifications during the installation process.

1 Install the air spring into the vehicle and position the top mount so it is properly aligned with the corresponding pattern. (Figures 11, 12, 13)

2 Reinstall the lower mount into the lower control arm. (Figure 14)

3 Install the air line, gently pulling outward to ensure secure seating. (Figures 15, 16)

4 Reinstall the wheel.

5 Lower the vehicle.

6 Installation complete.