0 A-3315 Arnott New Rear Right Air Spring Audi Q7 (4M) & Bentley Bentayga 150

AIR SPRING REMOVAL

1 Raise the vehicle.

2 Deflate the air suspension system per manufacturer’s specifications.

3 Remove the applicable wheel. (Figure 1)

4 Remove the air fitting from the air spring. (Figure 2)

5 Remove the rear lower and rear upper control arm bolts. (Figures 3, 4, 5)

6 Remove the tab lock from the bottom lug and disconnect the lower spring mount from the spring seat. (Figures 6, 7)

7 Remove the air spring from the vehicle. (Figures 8, 9)

AIR SPRING INSTALLATION

1 Install the new air spring into the vehicle. (Figures 10, 11)

2 Remove the shipping pin from the air fitting and insert the air line. (Figures 12, 13, 14)

Removal

Prior to inserting the existing air line into the new air strut you will need to remove the old original equipment air line fitting and discard.

Scratches and/or deep cuts in the air line can result in possible leaks. Inspect the air line before insertion. Air line needs to be replaced if damaged.

FIGURE 14

3 Reinstall the rear upper and lower control arm bolts. Tighten to manufacturer’s specifications. (Figure 15)

4 Inflate the air spring per manufacturer’s specifications.

5 Reinstall the wheel. Tighten to manufacturer’s specifications.

6 Lower the vehicle.