Arnott Installation Manuals
KIT # K-3401
BAG SPACER KIT
FOR 2014-PRESENT HARLEY-DAVIDSON® TOURING SERIES

Congratulations on your purchase of an Arnott® Motorcycle Air Suspension system. This system provides you with the ability to maintain your bike at a constant level regardless of load, resulting in enhanced vehicle ride, handling, and performance. We at Arnott Incorporated are proud to offer a high quality product at the industry’s most competitive pricing. Thank you for your confidence in us and our product.

Proper installation is essential to experience and appreciate the benefits of this system. Please take a moment to review these installation instructions before you begin to install these components on your motorcycle. The removal and installation of air suspension products should only be performed by a fully qualified, ASE Certified, professional.

It is equally important to be aware of all necessary safety measures while installing your new Air Suspension System. This includes proper lifting and immobilizing of the motorcycle and isolation of any stored energy to prevent personal injury or property damage.

"Elevate Your Ride."

1. For model year 2014-present motorcycles bag spacers must be added to keep the bags from touching the shocks. Insert the included quarter turn fastener with included washer through the grommet in the bag. Slide included spacer over the fastener on the other side of the bag. Install the included O-ring into the groove in the fastener. The O-ring will keep the spacer from falling off the fastener when the bags are removed. (FIGURES 1, 2, 3, 4)

FIGURE 1
FIGURE 1
FIGURE 2
FIGURE 2

FIGURE 3
FIGURE 3
FIGURE 4
FIGURE 4

2. The quarter turn fasteners are not needed if the bags are held in place with screw style mounts from the factory. Simply slide the spacer over the screw and use the O-ring to keep the spacer in place. (FIGURES 5, 6, 7, 8)

FIGURE 5
FIGURE 5
FIGURE 6
FIGURE 6

FIGURE 7
FIGURE 7
FIGURE 8
FIGURE 8



11-MC-FLT-SPACER REV 1 02/26/2019